 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HS-OP470ARH February 1998 Radiation Hardened, Very Low Noise Quad Operational Amplifier Description The HS-OP470ARH is a radiation hardened, monolithic quad operational amplifier that provides highly reliable performance in harsh radiation environments. Its excellent noise characteristics coupled with an unique array of dynamic specifications make this amplifier well-suited for a variety of satellite system applications. Dielectrically isolated, bipolar processing makes this device immune to Single Event Latch-up. The HS-OP470ARH shows almost no change in offset voltage after exposure to 100K RAD(Si) gamma radiation, with only a minor increase in current. Complementing these specifications is a post radiation open loop gain in excess of 40kV/V. This quad operational amplifier is available in an industry standard pinout, allowing for immediate interchangeability with most other quad operational amplifiers. Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC). SMD numbers must be used when ordering. Detailed Electrical Specifications for this are contained in SMD 5962-98533. A "hot-link" is provided on our homepage with instructions for downloading. http://www.intersil.com/data/sm/index.htm Features * QML Qualified Per MIL-PRF-38535 Requirements * Radiation Environment - Total Dose . . . . . . . . . . . . . . . . . . . . . . 1 x 105 RAD(Si) * Low Noise - At 1kHz . . . . . . . . . . . . . . . . . . . . . . . . 4.3nV/Hz (Typ) - At 1kHz . . . . . . . . . . . . . . . . . . . . . . . .0.6pA/Hz (Typ) * Low Offset Voltage. . . . . . . . . . . . . . . . . . . 2.1mV (Max) * High Slew Rate . . . . . . . . . . . . . . . . . . . . . 1.7V/s (Min) * Gain Bandwidth Product . . . . . . . . . . . . . 8.0MHz (Typ) Applications * High Q, Active Filters * Voltage Regulators * Integrators * Signal Generators * Voltage References * Space Environments Ordering Information SMD PART NUMBER 5962R9853301VXC N/A INTERSIL PART NUMBER HS9-OP470ARH-Q HS9-OP470ARH/Sample TEMP. RANGE (oC) -55 to 125 25 PACKAGE 14 Ld Flatpack 14 Ld Flatpack CASE OUTLINE CDFP3-F14 CDFP3-F14 Pinout HS-OP470ARH (FLATPACK) TOP VIEW OUT 1 -IN1 +IN1 V+ +IN2 -IN2 OUT 2 1 2 3 4 5 6 7 14 13 12 11 10 9 8 OUT 4 -IN4 +IN4 V+IN3 -IN3 OUT 3 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Copyright (c) Intersil Corporation 1999 File Number 4471 1 HS-OP470ARH Metallization Mask Layout DIE DIMENSIONS: 95 mils x 99 mils x 19 mils 1 mil (2420m x 2530m x 483m 25.4m) METALLIZATION: Type: Al, 1% Cu Thickness: 16kA 2kA SUBSTRATE POTENTIAL (Powered Up): Unbiased BACKSIDE FINISH: Silicon +IN2 V+ PASSIVATION: Type: Nitride (SI3N4) over Silox (SIO2, 5% Phos.) Silox Thickness: 12kA 2kA Nitride Thickness: 3.5kA 1.5kA WORST CASE CURRENT DENSITY: <2.0 x 105 A/cm2 TRANSISTOR COUNT: 175 PROCESS: Bipolar Dielectric Isolation +IN1 -IN2 -IN1 OUT2 OUT3 OUT1 OUT4 -IN3 -IN4 +IN3 V- +IN4 All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site http://www.intersil.com Sales Office Headquarters NORTH AMERICA Intersil Corporation P. O. Box 883, Mail Stop 53-204 Melbourne, FL 32902 TEL: (321) 724-7000 FAX: (321) 724-7240 EUROPE Intersil SA Mercure Center 100, Rue de la Fusee 1130 Brussels, Belgium TEL: (32) 2.724.2111 FAX: (32) 2.724.22.05 ASIA Intersil (Taiwan) Ltd. Taiwan Limited 7F-6, No. 101 Fu Hsing North Road Taipei, Taiwan Republic of China TEL: (886) 2 2716 9310 FAX: (886) 2 2715 3029 2 |
Price & Availability of HS9-OP470ARH-Q
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |